Ceramic Filled PTFE Base Materials
Ceramic Filled PTFE Laminates offer enhanced thermal and electrical stability
Using ceramic fillers all new generation PTFE base materials can get tailored for low z-axis CTE, high TC, high DK, etc – and some even without fiberglass. This is the key for enhanced thermal and electrical stability.
For a comprehensive selection of RF and Digital Laminates and Prepregs: View AGC Solutions Guide »
| Product Name | Description | DK | DF | TG (° C) | TC (W/mK) | IPC Slash Sheet |
|---|---|---|---|---|---|---|
| NF-30 | Ceramic-filled PTFE composites without a woven fiberglass reinforcement | 3.0 +/- 0.04 | 0.0013 | N/A | 0.5 | 4103A/230 |
| RF-10 | Low loss, high DK material | 10.2 +/- 0.3 | 0.0025 | N/A | 0.85 | 4103A/280 |
| RF-30A | High volume antenna material | 2.97 +/- 0.05 | 0.002 | N/A | 0.42 | 4103A/230 |
| RF-35HTC | High thermal conductivity laminate | 3.5 +/- 0.05 | 0.0007 | N/A | 1.84 | 4103A/240 |
| RF-35TC | Thermally conductive low loss laminate | 3.5 +/- 0.05 | 0.002 | N/A | 0.92 | 4103A/240 |
| RF-35TC-A | Thermally conductive low loss laminate | 3.5 +/- 0.05 | 0.002 | N/A | 0.83 | 4103A/240 |
| RF-60TC | High DK, high thermal conductivity material | 6.15 +/- 0.15 | 0.002 | N/A | 1.05 | 4103A/270 |
| TLF-35A | Low cost PA base material | 3.5 +/- 0.05 | 0.0026 | N/A | 0.37 | 4103A/240 |
| TLY-5Z | Low DK, low Z axis laminate | 2.2 +/- 0.04 | 0.0015 | N/A | 0.2 | 4103A/200 |
| TSM-DS3 | Dimensionally stable low loss laminate | 3.0 +/- 0.05 | 0.0014 | N/A | 0.65 | 4103A/230 |
| TSM-DS3b | Dimensionally stable low loss laminate | 3.0 +/- 0.04 | 0.0014 | N/A | 0.65 | 4103A/230 |
| TSM-DS3M | Dimensionally stable low loss laminate | 2.94 +/- 0.04 | 0.0014 | N/A | 0.65 | 4103A/230 |